Products
Search:

Hydraulic Brake Booster for Forklift Brake System

Hydraulic Brake Booster for Forklift Brake System
Click the image to view original image
Short Description
 Model No.: HBB-25    Clicks: 3107
China DE HBB-25 Hydraulic Brake Booster make the forklift & vehicle's braking system more portable, comfortable, and the braking effect more reliable.
Keywords: Hydraulic Valves .

Hydraulic Brake Booster for Forklift Brake System Key Specifications / Features

1. Product Performance:

HBB-25 Hydraulic brake booster and brake master cylinder form the roll booster of brake. This valve is widely used in four to eight tons of forklifts. Because of use the pedal hydraulic booster, it make the vehicle's braking more portable, comfortable, and the braking effect more reliable. The braking system has the following characteristics:

1) The valve can be share a hydraulic oil source with full hydraulic steering system. The steering and braking can work separately; also can be used in combination, and it doesn't create mutual interference when they work at the same time. This valve compares with conventional vacuum booster power brake; the required components are much less (no air pump and air supply device). The structure is simple and it's convenient to decorate.

2) This valve is hydraulic power brake when the valve braked in such a state of it has power to supply oil, it's mechanical brake function when the oil source failure. So the brake function is reliable.

3) This valve's brake booster braking, the proportional property is good, the braking is sensitive and no hysteresis.

4) When the valve uses the pedal operation, it's simplify operation, comfortable and the noise is small. It improves the driver's operating strength.
 
2. Model Code: Hydraulic Brake Booster Model Code
HBB------ L  25  * *
  ①       ②  ③   ④

① Hydraulic brake booster
② Thread connection
③ Max inlet flow(L/Min)
④ Forklift's ton
 


3. Performance Parameter:
Max inlet flow:25 L/min.
Brake pressure 2.5-5 MPa.
Braking force and push power by a ratio of 2.7 to 3.5.
The pressure loss of maximum inlet flow: ≤ 2.0 Mpa.
Oil viscosity:42-74mm 2 /s.
The hydraulic oil temperature range:-20 - 80 ℃.
The cleanliness of the oil: cleanliness code level of oil and system shall not be higher than 19/16 of the GB/T14039.


4. Installation Size
 Hydraulic Brake Booster Drawing

Products Related to Hydraulic Brake Booster for Forklift Brake System


Contact
Miss Lavendie Lee 
Email: info@gearvalves.com
Tel: +86 511 84514398 
Fax: +86 511 85347508
Cell: +86 13775559804 
View Map