Search:
Technical Articles

Gear Standards -- NF

Posted: 2014-04-22 21:31:05  Hits: 4653
1. NF E37-601/A1-2004  Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements; Amendment of item one. data sheets for thermal turbines for industrial applications. 
2 .NF E23-030-1-2002  Calculation of load capacity of spur and helical gears. Part 1: basic principles, introduction and general influence factors. 
3. NF E23-030-3-2003  Calculation of load capacity of spur and helical gears. Part 3: calculation of tooth bending strength.
4. NF E23-030-2-2003  Calculation of load capacity of spur and helical gears. Part 2: calculation of surface durability (pitting).
5. NF T60-602-1995  Extreme pressure lubricants for industrial gears. Evaluation of oxidation stability by artificial ageing.
6. NF L32-610-1954  Symmetrical radial serrations. 
7. NF R11-415/A1-1999  Road vehicles. Electrical performance of starter motors. Test methods and general requirements NF ISO 8856-1997. 
8. NF E23-037-2004  Gears. Evaluation of instruments for the measurement of individual gears.
9. NF T60-530-1-1999  Lubricants, industrial oils and related products (Class L). Family C (Gears). Part 1: specifications for lubricants for enclosed gear systems.
10. NF E23-001-2-1999  Vocabulary of gear terms. Part 2: definitions related to worm gear geometry.
11. NF E23-021-2001  Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements.
12. NF S84-060-1996  Horology. Center staff for watches. Fitting dimensions with cannon pinion.
13. NF S80-569-1995  Horology. Reducing involute toothing gears. Toothing corrected by shift to 0.5 module.
14. NF S80-560-1995  Horology. Involute toothing gears. 
15. NF S80-501-1995  Horology. Corrected cylcloidal or involute toothing gears. Preferred modules.
16. NF S80-504-1995  Horology. Corrected cycloidal or involute toothing gears. Toothing for coupled gears.
17. NF S80-525-1995  Horology. Corrected cycloidal toothing gears. Step up gears. Basic profiles. Driving gear and driven gear.
18. NF S80-566-1995  Horology. Involute toothing gears. Normal toothing.
19. NF S80-567-1995  Horology. Reducing involute toothing gears. Corrected toothing without variation of centre distance.
20. NF S80-568-1995  Horology. Reducing involute toothing gears. Corrected toothing with variation of centre distance.
21. NF S80-541-1995  Horology. Corrected cycloidal toothing gears. Spring-barrel centre gears.
22. NF S80-565-1995  Horology. Involute toothing gears. Basic racks.
23. NF S80-526-1995  Horology. Corrected cycloidal toothing gears. Step up or reducting gears.
24. NF S80-505-1995  Horology. Corrected cycloidal or involute toothing gears. Toothing for trains of gears.
25. NF R11-415-1997  Road vehicles. Electrical performance of starter motors. Test methods and general requirements.
26. NF R15-517-1996  Synchronous belt drives. Automotive belts. Determination of physical properties.
27. NF R32-402-1992  Cycles. Screw threads used to assemble freewheels on bicycle hubs.
28. NF R32-407-1992  Cycles. Splined hub and sprocket. Assembly dimensions.
29. NF R11-411-1987  Road vehicles. Starter-gear system. Gear characteristics and control.
30. NF R32-401-1974  Cycle free wheel sprocket with plain teeth.
31. NF R12-205-1988  Commercial vehicles and buses. Gearbox flanges. Type S.
32. NF R12-204-1988  Commercial vehicles and buses. Gearbox flanges. Type A.
33. NF L24-685-2001  Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) silver plated. Classification: 1 100 MPa (at ambient temperature)/650 degrees Celsius.
34. NF L24-684-2001  Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1,100 MPa (at ambient temperature)/650 degrees Celsius.
35. NF L24-963-1998  Inserts, thin wall, self-locking. Installation and removal procedure. 
36. NF L24-964-1998  Inserts, thin wall, self-locking. Design standard.
37. NF L24-009-1996  Aerospace series. Installation holes for self-locking, serrated shank nuts. Design standard.
38. NF L32-612-1996  Aerospace series. Undercuts for splines. Design standard.
39. NF L36-711-1974  Roller chains and fitted cog wheels gearing. Selection for aerospace use.
40. NF L32-350-1975  Cylindrical serrated pins for minor controls. 
41. NF L44-514-1975  Low pressure compressed air starting connections.
42. NF J95-044-2001  Small craft. Steering gear. Geared link systems.
43. NF J95-030/A1-2000  Small craft. Start-in-gear protection.
44. NF F10-420-1991  Railway rolling stock. Coupling, traction and driving gears for tractive and hauled stock.
45. NF E73-043-1975  General purpose circular saws for woodworking.
46. NF F02-303-1990  Railway rolling stock. Gears pinions and wheels.
47. NF E66-620-1983  Broaching tools. Shapes and dimensions of broach teeth.
48. NF E62-258-1976  Modular units for machine tools. Multispindle heads. Offset boss straight-toothed pinions.
49. NF E62-257-1976  Modular units for machine tools. Multispindle heads. Simple straight-toothed pinions.
50. NF E66-236-1966  Chain transmissions. Profile of chain wheel hobs.
51. NF E66-235-1966  Chain transmissions. Profile of chain wheel modual cutters.
52. NF E51-234-2003  Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors.
53. NF E26-108-1986  Chain transmission. Flat top chains and wheels.
54. NF E27-624-1981  Serrated lock washers external teeth.
55. NF E62-251-1976  Unit heads. Multi spindle heads. Offset boss straight toothed pinions.
56. NF E62-250-1976  Unit heads. Multi spindle heads. Simple straight toothed pinions.
57. NF E62-220-1976  Modular units for machine tools. Multispindle heads. Tapping spindles. Normal series. General.
58. NF E23-030-5-2003  Calculation of load capacity of spur and helical gears. Part 5: strength and quality of materials.59. NF E23-035-2003  Petroleum and natural gas industries. High speed special-purpose gear units.
60. NF E23-022-1-2002  Acceptance code for gear units. Part 1: test code for airborne sound.
61. NF E22-141-1955  Cylindrical involute splines.
62. NF E23-009-1998  Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile.
63. NF E23-001-1-1998  Vocabulary of gear terms. Part 1: definitions related to geometry.
64. NF E23-005-1998  International gear notation. Symbols for geometrical data.
65. NF E04-113-1998  Technical drawings. Conventional representation of gears.
66. NF E04-015-4-1998  Kinematic diagrams. Graphical symbols. 
67. NF E23-010-1997  Cylindrical gears for general engineering and for heavy engineering. Modules.
68. NF E23-007-2-1997  Cylindrical gears. ISO system of accuracy. Part 2: definitions and allowable values of deviations relevant to radial composite deviations and runout information.
69. NF E23-007-1-1995  Cylindrical gears. ISO system of accuracy. Part 1: definitions and allowable values of deviations relevant to corresponding flanks of gear teeth.
70. NF E23-014-1994  Gears. ISO system of terminology. Terminology for the appearance of gear teeth: wear and damages.
71. NF E22-610-1986  Mechanical transmissions. Coupling devices. Classification. Terminology. Graphical symbols.
72. NF E22-144-1987  Straight cylindrical involute splines. Side fit. Pressure angles 30 degrees, 37.5 degrees and 45 degrees.
73. NF E22-143-1950  Involute splines - generation hub cutting.
74. NF A35-567-1984  Iron and steel. Case hardened alloy steels for solid highly-stressed mechanical parts. Grades. Semi-finished products and bars.
75. NF S91-116-1990  Dentistry. Dental rotary instruments. Cutters. Part 1: steel laboratory cutters.
76. NF J95-064-2003  Small craft. Anchoring, mooring and towing. Strong points.
77. NF E22-151-1967  Cylindrical straight-sided serrations.
78. NF E66-541-1983  Drill chucks. keys for three-jaw chuck. dimensions.
79. NF E62-255-1976  Modular units for machine tools. Multispindle heads. Control straight-toothed pinions for tapping spindles NO. 1 and 2.
80. NF E62-256-1976  Modular units for machine tools. Multispindle heads. Control straight-toothed pinions for tapping spindles NO. 3 and 4.
81. NF T60-507-1991  Lubricants, industrial oils and related products (class L). Classification. Part 6: family C (gears).
82. NF E23-018-1988  Worm Gears. Information to be given to the manufacturer.

Contact
Miss Lavendie Lee 
Email: info@gearvalves.com
Tel: +86 511 84514398 
Fax: +86 511 85347508
Cell: +86 13775559804 
View Map